Brewing Coffee With The Grinding Function; Adding Beans - Silvercrest IAN 290939 Bedienungsanleitung

5) Fill the water tank
6) Insert the plug into a mains power socket.
7) Press the
Press the
8) The light element
process finishes, you will hear a beep and the
Press the
9) Empty the coffee pot
10) Wait until the appliance has cooled down, then rinse the filter basket
clean water again.
The appliance is now ready for use. The
Brewing coffee with the grinding function

Adding beans

1) Open the lid of the coffee bean container
Do not exceed the MAX marking on the coffee bean container
2) Close the lid of the coffee bean container
3) Set the grinding fineness setting for the coffee beans: Turn the dial for setting
the grinding fineness
grinding result (fig. 1). The finer the grinding result, the stronger the coffee.
Fig. 1
■ 8 │ GB │ CY
with enough water for 8 cups and replace it in the appliance.
button to switch off the grinder. The
button .
lights up; the
button again to stop the keep warm process.
and rinse it with clean water again.
anticlockwise for a coarse result, clockwise for a fine
button
button flashes. Wait until the brewing
button
button lights up permanently.
and add coffee beans.
again.
SKML 1000 A1
lights up.
stops flashing.
with
.