Eu Declaration Of Conformity - FAAC TM2 R Bedienungsanleitung

EU DECLARATION OF CONFORMITY

FAAC S.p.A. Soc. Unipersonale hereby declares that the TM2 R motor complies
with the European Union's applicable harmonisation regulations: Directive
2014/53/EU, Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the following
Internet address: http://www.faac.biz/certificates
DECLARATION OF INCORPORATION FOR PARTLY COMPLETED
MACHINERY
(2006/42/EC ANNEX II P.1, PAR. B)
Manufacturer and person authorised to prepare the relevant technical docu-
mentation
Company name:
Address:
hereby declares that for the partly completed machinery:
Description:
Model:
The essential requirements of the Machinery Directive 2006/42/EC (includ-
ing all applicable amendments) have been applied and fulfilled. The relevant
technical documentation has been compiled in compliance with Annex VII B.
Furthermore, the following harmonised standards have been applied:
EN 60335-2-97:2006+A2:2010+A11:2008+A12:2015.
And also undertakes to transmit, in response to a reasoned request by the
national authorities, relevant information on the partly completed machinery
by mail or e-mail.
Finally, the manufacturer declares that the above-mentioned partly completed
machinery must not be commissioned until the final machine in which it is to
be incorporated has been declared compliant with the requirements of the
same Machinery Directive 2006/42/EC.
Bologna, 19-09-2018
TM2 R
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA – ITALY
Tubular motors for screens and roller shutters
TM2 R
35
CEO A. Marcellan
A4516_6G66_Rev.A