Installing The Machine On Ships; Levelling The Machine - Miele PDW 909 SOM Installationsplan

en - Installation notes
32
The feet of the washer-dryer stack must be secured to the fastening
points on the floor using the fittings supplied.
The fittings included are for bolting the washer-dryer stack to a con-
crete floor. If other floor types are present at the installation site, the
fastening material must be ordered by the customer.

Installing the machine on ships

On other types of floor structures (in cases where the machine is be-
ing installed on sea-going vessels, for example), the fixing materials
must be provided on site.
For installation on sea-going vessels, the machine must be secured to
prevent slipping and tipping by fastening it to the floor of the vessel
(e.g. using clamps that are welded to the floor of the vessel).
All 4 of the machine's feet must be secured.


Levelling the machine

Align the washing machine vertically and horizontally using the ad-

justable feet and a spirit level.
The washing machine must stand evenly and horizontally on all four
feet to ensure trouble-free and energy-efficient operation. Otherwise
the water and energy consumption increases and the washing ma-
chine might move around.
After aligning the machine, tighten the lock nuts by turning them in

a counterclockwise direction with a spanner. This will prevent the
feet from adjusting themselves.