Programming - Fagor FEC-2105T Bedienungsanleitung

EN 4 / PROGRAMMING YOUR MACHINE

•PROGRAMMING

Nature of the washing and
the temperature
1
Spin speed setting
•Programming a washing cycle:
— Turn the selector 1 to choose the most suitable programme and washing temperature for
the type of fabric to be washed.
NB: Turning the selector to any position other than "O" provides power to the machine.
— Using the selector 2 , choose:
- Either a suitable spin speed for your type of washing.
The spin speed is automatically restricted in the "Synthetics", "Woollens/Delicates"
and "Hand wash" programmes.
- Or drip dry.
The cycle will finish with a gentle spin at 100 rpm.
- Or stop with tub full of water.
Your machine will stop with the tub full of water before the final spin.
— Use the buttons 4 to select any options you wish.
— Select immediate start by pressing "Start/Pause"
— ... or select a start delayed by 1 to 19 hours by pressing button
see the section "DETAILS OF THE OPTIONS • Delayed start") and then press
"Start/Pause" . 5
•Adding or removing an item during the cycle
— Press the "Start/Pause"
— Add or remove the items of laundry * .
— Press the "Start/Pause"
(*) the time the lid remains locked depends on the temperature inside the machine and,
for safety reasons, may take several minutes if you are interrupting a cycle at more than
40 °C.
NB: If you have selected a delayed start, you can access the drum instantly at any time in the
period before the washing cycle starts without having to interrupt and restart the cycle.
•Cancelling while programming, washing or during a pause:
— Set the selector 1 to the "O" position.
This can be done at any time during the cycle or during programming, or even during a pause.
NB :
- In all cases, after cancelling you must reprogramme everything from the start.
- If you have cancelled during the washing phase, remember to empty the water, if necessary.
•End of the cycle:
NB: After spinning, some models automatically position the drum opening at the top to
provide easy access to the washing. This operation lasts at most 3 minutes.
— Screen A then displays "- 0 -", indicating that the cycle has finished.
1
Set the selector to the "O" position.
You can now open the lid and remove your washing.
All manuals and user guides at all-guides.com
Display of remaining time
or delayed start
2
5 ...
(impossible during spin):
5
button to interrupt the cycle.
button 5 to restart the cycle.
Delayed start setting
A 3
5
4
Start/Pause
Options
- Position "800" for example
- Position "100"
- Position
Countdown in
(the two dots flash throughout the whole of the cycle)
3 ( for how to do this,
Display of the symbol
the time remaining before the cycle actually starts.
themselves) shows the waiting period before the
Countdown of the time is stopped in
(the displayed time flashes)
Resumption of the countdown in
(the two dots start flashing again)
6
Information:
All the buttons are on micro-
switches and do not remain depressed.
In any case, the "Start/Pause" button
cannot cancel a programme.
Important :
Before starting your machine,
check that the power cable is plugged
in and the water tap is open. Also
ensure that the drum doors are closed
correctly and the machine's lid is shut.
During the "End of Cycle" phase, any
action on one of the controls (the
selectors or the buttons) returns you to
"Programming" mode. As a safety
measure, when the cycle is over, we
recommend that you unplug the power
cable and turn off the water tap.
Display and position of the selectors
In A , display of the length of the selected
programme
for example:
2
Selector on
Light(s) for the option(s) selected
A of the time remaining before the
end of the cycle
in A and countdown of
An animation (four small elements turning on
start of the cycle.
Selector 1 set to "O"
All the indicator lights and the display are OFF
A
A