hanseatic HHE64NBAF Gebrauchsanleitung Seite 45

Page EN-16 Using and caring for the hob
5
The flashing red dot next to the cooking
zone indicator shows that the cooking time
limit is activated for this cooking zone.
H
Once the preset time has elapsed, the
cooking zone will switch off automatically
and the residual heat indicator '
– –
4. To switch off the timer function in the in-
terim, touch both timer sensors
simultaneously.
If you would like to amend the set time
in the interim, you will need to carry
out all of the steps once again.
Cooking time limits for several
cooking zones
You can set a cooking time limit for all 4 cook-
ing zones. The individual cooking times can
be of different lengths.
The timer indicator always shows the lowest
time set for a cooking zone.
Example: For cooking zone 1, a time of
5 minutes is set; for cooking zone 2, a time of
15 minutes is set.
Requirement: The hob is switched on.
1. Set the time for cooking zone 1 to 5
minutes (see „Cooking time limit for one
cooking zone" on page EN-15).
2. Then touch the cooking zone sensor / (8)
for cooking zone 2.
3. Set the desired heat level.
4. Use the same process to set the
time for cooking zone 2 to 15 minutes.
The timer indicator will show the time you
have set for cooking zone 1.
' will flash.
K
Cooking zone 1:
5 minutes
The red dot next to the cooking zone indicator
shows that a cooking time limit has been set
for these cooking zones.
and
A flashing dot means that the timer indicator
is showing the cooking time limit for this cook-
ing zone. For this cooking zone, the lowest
cooking time limit is currently set.
Cooking zone 1
Once the set time has elapsed, cooking
zone 1 will switch off automatically and the
residual heat indicator '
dot will start to flash next to the indicator for
cooking zone 2.
0 5
6 5
Cooking zone 2:
15 minutes
H 5
Cooking zone 2
' will flash. The red
K