hanseatic HKGK17954DI Gebrauchsanleitung Seite 67

Preparing the doors
(38)
1. Keep the included plastic inserts for the
fridge door (38) and the freezer door (39)
ready to hand.
(40)
2. Loosen the screw on the plastic insert (40)
for the fridge door and remove the plastic
insert.
3. Screw down the plastic insert (38) on the
opposite side of the fridge door.
(41)
4. Loosen the screw on the plastic insert (41)
for the freezer door and remove the plas-
tic insert.
5. Screw down the plastic insert (39) on the
opposite side of the freezer door.
Attaching the hinges and doors
(39)
(7)
1. Unscrew the left screw foot (7).
(33)
(38)
(32)
2. Screw on the lower hinge (33) on the left
with the two screws (32) and screw the
screw foot (7) back in.
Use the screwdriver to tighten the screws
by just 2 to 3 turns, and then use the 8
mm spanner to tighten them fully.
(39)
3. Position the appliance upright.
4. Attach the freezer door (6).
5. Use the screws (28) to attach the middle
hinge (29).
If necessary, use the washers (30) to ad-
just the gaps between the hinge and the
doors.
Start-up
Page EN-29
(7)
(28)
(29)
(30)