Honeywell HC09CESAWK Benutzerhandbuch Seite 17

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
FAN SPEED CONTROL
2 settings: Low and High .
TEMPERATURE CONTROLS
• Used for adjusting the room temperature.
•
The default display is room temperature.
• In cooling mode, when + or - button is pressed, the set temperature is displayed and may be
adjusted. After a few seconds the display will revert back to room temperature. Temperature is
only adjustable in Cool mode.
Note: By pressing both + and - buttons at the same time, the display will toggle between Fahrenheit
(°F) and Celsius (°C).
MODE CONTROL
Settings: Air Conditioning, Dehumidifying, Fan.
The corresponding indicator light will illuminate to indicate the current mode setting.
• Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 61°F - 89°F (16°C - 32°C).
• Dehumidifying Mode (DRY)
Air is dehumidified as it passes through the unit without being in full Cooling mode.
If room temperature is higher than 77°F (25°C), fan speed can be adjusted. Otherwise, fan speed
is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose.
Continuous drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
• Fan Mode
For air circulation without air conditioner cooling.
EN 9