Honeywell HC09CESAWK Benutzerhandbuch Seite 14

SEMI-PERMANENT INSTALLATION
If required, your Portable Local Air Conditioner can be installed semi-permanently though a hole
in the wall or window.
1. Drill a hole through an outside wall or through a window pane. Ensure the MIN/MAX dimensions
for the hole size and its position are adhered to. (Fig. 1 and Fig. 2).
2.
Insert and secure the Flange Fixture + Hole Cover
side is facing the room.
3.
When assembling the Exhaust Hose and Connector, follow step 1, 2 and 4 in the previous
"installation through a window" section. Do not connect the Nozzle.
4.
Fix the Unit Connector end of the assembled Exhaust Hose into the Flange Fixture + Hole Cover
that was secured on the wall.
5
Note: When the unit is not in use, remove the Exhaust Hose from the Flange Fixture on the wall and
use the included Hole Cover to cover the hole in the wall.
Fig.1
In the In the wooden
window kickboard
panel of a french
window
MIN 20" (50 cm)
In the wall: we
recommend you to
insulate the section
of wall using suitable
insulation materials
EN
MIN 20" (50 cm)
into the newly drilled hole, so that the cap
5
Fig.2
6
31.5" (80 cm)