EUROM 3000 RVS Bedienungsanleitung Seite 26

ASSEMBLY
You need:
 Open-ended spanner
 Adjustable monkey wrench
 Screwdriver
1. Connect the burner, stand and operation panel on the base avec the M5x12 bolts (4x)
2. Connect the flame screen on the base of the burner avec the 3/16 bolts and ringlets (4x).
3. Insert the 4 pins of the safety guard in the holes of the base of the burner.
4. Connect the reflector cap with the burner, using the ringlets (6x) and the wing nuts (3x)
5. Connect the gas hose with the heater and the gas regulator . Afterwards, turn the
coupling firmly with an open-ended spanner!
- 26 -