Use And Maintenance; Technical Data; Identification; Handling - Gaspardo MONICA 250 Gebrauch Und Wartung

Seite von 166

/ 166
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

ENGLISH

1.3 TECHNICAL DATA

Toolbar width

Toolbar width (closed) (road transport)

Max row number

Row distance

Seed hopper capacity

Fertilizer capacity

PTO (rpm)

Power required

Three- point universal joint

Weight (*)

Tyres

No-load noise detection

Tractor hydraulic distributors

(*) With fertilizer and microgranulator.

The technical data and the models provided must be considered as non binding.

We reserve the right to change them without notice.

1.4 IDENTIFICATION

Each individual machine has an identification plate (Fig. 1)

indicating the following details:

1) Mark and address of the Manufacturer;

2) Type and model of machine;

3) Unloaded mass, in Kilograms;

4) Mass full load, in Kilograms;

5) Registration of the machine;

6) Year of manufacture;

7) CE mark.

You are advised to note down your data on the form below, along

with the date of purchase (8) and the dealer's name (9).

8) ____________________

9) ____________________

This information must always be quoted whenever assistance

or spare parts are needed.

1.5 HANDLING

If the machine has to be handled, it should be lifted by hooking

cloth ropes to the attachment points provided and using a suitable

hoist or crane with sufficient capacity (Fig. 2). Because of the

danger involved, this operation should be carried out by trained

and responsible personnel. The mass of the machine is on the

identification Plate (Fig. 1). Stretch the rope to keep the machine

level. During lifting, be careful to avoid damaging parts of the

equipment (hoppers, drive axles, etc.). The hook points can be

detected by finding the "hook" symbol (14, Fig. 4). For machines

of up to four rows, hook up at points: A, C and D. For machines of

more than 4 rows hook up at points: A, B, C, D and E.

fig. 2

B C