Operation Of The Unit - Klauke EKM 60UNV-L Bedienungsanleitung

Instruction Manual Universal tool
EKM 60UNV-L

4.1 Operation of the unit

First you have to select the right adapter for the type of dies you intend to use respectively the cutting blades.
Attention
After having terminated the working cycle and prior to changing the dies remove battery to avoid unin-
tended use. Avoid unintended starts. Make sure the switch is in the off position before plugging in.
Attention
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from mo-
ving parts.
Attention
Keep proper footing and balance at all times.
Attention
Use safety gear and always wear eye protection.
Attention
The crimping process can be interrupted at any moment by releasing the trigger.
In case of error or emergency the dies/blades can be returned into the starting position by actuating the retract button
(pic. 1.2).
The working cycle is terminated when either the crimping force is reached or the cable/conductor (pic. 44, 46),
DIN rail, threaded rod is cut.
Afterwards a second working cycle can be initiated or the it can be fi nished by opening the latch (pic. 1.10).
4.1.1 Use of crimping dies
When using the 22 style dies (see tab 4) the retaining clips have to be actuated while the dies will be inserted conse-
qutively from the side into the head respectively the adapter.
During the crimping process the connecting material is positioned in the stationary half of the die whereas the moving
part of the die is approaching the compression point3.
After having reached the maximum crimping force the dies return into the starting position automatically.
HE.14039_C © 02/2011 5
GB