Remarks In Respect Of The Determined Use; Operation Of The Unit - Klauke EPG-ULTRA-ID Bedienungsanleitung

Instruction manual EPG-ULTRA-ID
EKM 60 ID-L
3.3 Description of the tool indication
See Tab. 1.
Prior to operating the unit the charging level of the battery (pic. 1.2) should have been tested. A low charging level
can be detected by the  ashing of the LED (pic. 1.1) for 20 s at the end of a crimping cycle.
4.

Remarks in respect of the determined use

Before starting any work on electrical appliances it must be safeguarded that there are no live parts in the immediate
assembly area of the user. If this not possible special precaution measures (
must be provided.
Attention
Keep your working area clean and tidy. Do not use this tool when you are tired, on drugs, had alcohol or if
you are medicated.

4.1 Operation of the unit

Cycle: see pictures in front.
The crimping head should be turned into the desired position before starting the crimping cycle. It is signi cantly
easier to turn the crimping head in a pressure free state.
Attention
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from mo-
ving parts.
Attention
Keep proper footing and balance at all times.
Attention
Use safety gear and always wear eye protection.
Attention
The crimping process can be interrupted at any moment by releasing the trigger.
HE.14820_C © 04/2013
l
Glomar AG Seestrasse 11
l l
CH-9326 Horn T +41 71 841 70 70
see EN 50110-1
l
www.glomar.ch
) for working near live parts
5
GB
30