Cleaning; Transport; Storage; Maintenance - Carromco 07050 Aufbauanleitung

07050
6 . 7 USI NG THE B OAR D
You can use the board standing up or seated. To use it standing up, stand with your knees slightly bent and your legs
placed slightly apart in the middle of the board. To paddle on the right side of the board, hold the middle of the paddle
with your right hand and grip the knob with your left. To paddle on the left side of the board, reverse this position.
Always bring along the included paddle when using the board.
Use the luggage cord to secure any objects on the board for transport.
Use the carrying handle to transport the board in the water or on land.
If one of the air chambers fails while you are using the board, return to land directly and cease use of the board until
the damage has been repaired.
No t e !
soiled with oil.
Do not use any abrasive, aggressive, or solvent-based cleaning agents to clean the product; do not use firm brushes
or metallic sponges. Do not use a high-pressure cleaner. Otherwise the product may be damaged.
To clean the board, proceed as follows:
1. First spread out the board on a dry and even surface. The board may be inflated or deflated.
2. Make sure that all valve caps are securely closed.
3. Now clean the board with a damp cloth or sponge or spray it down with a water hose.
4. Wipe the board with a dry, soft cloth and let it fully dry.
5. Clean the other parts of the SUP set with a damp, soft cloth and let them fully dry.
8 . TR ANSP OR T
Use the carrying handle to transport the board over short distances on land. To transport the SUP set over longer
distances, first clean all its individual parts (see "Cleaning"), let it fully dry, and then store it in the carrying bag. Also
heed the instructions under "Storage".
No t e !
storage. Store the SUP set at a well-ventilated, dry location not exposed to frost or direct sunlight and out of the
reach of children. Storing the SUP set while it is moist or in a moist location may result in mould growth.
Proceed as follows:
1. Fully deflate the board and make sure the valves stay in the open position (see "Deflating the board").
2. If you used the seat, deflate the seat by opening the valve on the back part of the seat.
3. Remove the middle fin (see "Mounting the middle fin").
4. Spread the board out, bottom side down, on a dry and even surface.
5. Roll up the board and wrap the strap around the rolled-up board.
6. Spread the carrying bag out on the floor and place the rolled-up board in its middle.
7. Remove the connecting tube from the paddle blade with opening by pressing in the lock pin and pulling out the
connecting tube.
8. Open the locking lever and pull the paddle blade with no opening and/or the T tube from the connecting tube.
9. Lay the disassembled paddle in the carrying bag on top of the rolled-up board.
10. Fold the carrying bag and close it.
1 0. M AI NTE NANCE
Always check the board for any signs of damage before use. Check for leaks, tears, loss of pressure, and signs of
ageing and wear. Loss of pressure may indicate a leak, but may also be due to fluctuations in temperature.
Before repairing the board, always fully deflate it (see "Deflating the board"). If you cannot repair damages such as
larger tears and rips, contact a specialist repair centre or our customer service at https://carromco.com/contact
7. CLE ANI NG
NOTE ! R i s k o f p r o d u c t d a m a g e !
Always clean the SUP seat after using it, especially after use in salt water or if it has been
9 . STOR AG E
NOTE ! R i s k o f p r o d u c t d a m a g e !
Before storing the SUP set, make sure it is fully dry. If necessary, let it fully dry before
-9-
E N G L I SH