Disposal Instructions; Specifications - Carromco 07050 Aufbauanleitung

07050 E N G L I SH
7. Place the valve key on the replacement valve and turn the top part of the valve clockwise to tighten.
Before using the board again, make sure the valve closes properly and is fully air-tight (see "Leaky valves" and
"Defective valves"). If the problem persists, contact our customer service at https://carromco.com/contact
1 1 . DI SP OSAL I NSTR UCTI ONS
Dispose of all packaging materials and the SUP set at an approved waste management service or at your local
communal waste management facility in keeping with all applicable guidelines. Your local waste management facility
will be happy to inform you of your options to correctly dispose of your product in an environmentally friendly manner.
1 2 . SP E CI F I CATI ONS
Board dimensions, inflated (L x W x H): approx. 301 x 72.5 x 16 cm
Board weight: approx. 7.2 kg
Max. weight load for board: 100 kg
Tested to: EN ISO 25649-1, EN ISO 25649-2, EN ISO 25649-7, EN 16083
CAR R OM CO G M B H & CO. K G
Mühlenweg 144, D-22844 Norderstedt / Germany
Service-hotline.: 49 (0) 1805 25 63 63
E-mail: service@carromco.com
Website: www.carromco.com
Please keep for future reference.
MADE IN CHINA
-11-