Inhaltsverzeichnis
Werbung
DJI Three-Channel Follow Focus
DJI Three-Channel Follow Focus Settings
Tap on the bottom left of the High-Bright Remote Monitor screen to enter System Menu, select
General Settings > Three-Channel Follow Focus Settings to:
• enable or disable the zoom stick;
• invert the direction of the zoom stick, focus knob, or iris slider;
• set the focus knob function as focus or zoom. If the focus knob function is set to zoom, turning
the focus knob will adjust the zoom. In this case, the zoom stick has no function;
• calibrate the zoom stick. If the image automatically zooms in or out slowly in the monitor liveview
when the zoom stick is enabled and not operated, tap Zoom Stick Calibration and follow the on-
screen instructions to calibrate the zoom stick.
To configure the Three-Channel Follow Focus settings, the firmware version of the High-
Bright Remote Monitor needs to be updated to v01.05.0400 or later.
System Status LED Descriptions
Blinking Pattern
Solid green
Solid red
Blinks red quickly
Firmware Update
Update the firmware of the DJI Three-Channel Follow Focus via the DJI High-Bright Remote Monitor
using the DJI ASSISTANT
1. Install follow focus on the remote monitor. Press the power button to power on.
2. Connect the remote monitor to a computer with a USB-C cable.
3. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
4. Select the device and click Firmware Update on the left side of the screen.
5. Select the firmware version.
6. The firmware will download and update automatically.
7. The device will restart automatically after the firmware update is complete.
Specifications
Model
Weight
Operating Temperature
6
User Guide
Description
Working normally
The communication between the follow focus and the remote
monitor is abnormal.
Self-diagnosis failed. Restart and try again.
TM
2 (Ronin Series) software.
3CFF
874 g
-10° to 45° C (14° to 113° F)
Werbung
Inhaltsverzeichnis
