Connect Console To Wi-Fi; Download Wslink Configuration App; Console In Access Point Mode - Bresser WIFI WSC PRO 7in1 Bedienungsanleitung

5.

CONNECT CONSOLE TO WI-FI

5.1

DOWNLOAD WSLINK CONFIGURATION APP

To connect console to WI-FI, you need to download the "WSLink" configuration app from one of
the following links by scanning the QR code or search "WSLink" in App Store or Google Play.
WSLink app is required for the console to connect to WI-FI and Internet, setup weather server,
perform sensor calibration and firmware update.
NOTE :
- WSLink app is only for configuration. It is not used to remotely view your weather data.
- WSLink app may subject to change and update.
5.2

CONSOLE IN ACCESS POINT MODE

1. When you power up the console for the first time, the console LCD will show flashing "AP" and "
" icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI settings. User
can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually.
App Store Google Play
AP mode of the console
24