Clean Air Optima CA-106 Smart Gebrauchsanweisung Seite 19

Warning!
Do not damage the filters, the filters must not be cracked. Damaged filters needs to be
replaced.
Never wet or rinse the True HEPA H13 Filter with water. If the True HEPA H13 Filter has been
rinsed with water, it needs to be replaced.
Signs for used up filters that needs to be replaced
(Only for True HEPA H13 Filter and Evaporative filter)
Increased sound, reduced air flow, congested filters, rising presence of smells. Filters needs
also to be replaced by new ones when the True HEPA H13 Filter changes its color from white to
grey or black. If the True HEPA H13 Filter remains white, there is NO need to replace the filter.
If the evaporative filter becomes porous, starts to smell or causes increased noise, it should be
replaced.
How to order filters:
Contact Clean Air Optima® Customer Service tel. + 31 (0) 742670145 or visit our webshop:
https://www.cleanairoptima.com/-accessoires
Clean Air Optima® Aircooler storage
If the Aircooler will not be used for an extended period of time:
1. Drain the water tank completely and make sure that there is no water stocked
inside the water tank.
2. Unplug the device and fold up the power supply cord.
3. Remove and clean the filters. After cleaning reinstall the filters back into the device.
4. Store the Aircooler in a cool, dry location, away from direct sunlight, extreme
temperature and excessive dust.
19