Mode Button - Clean Air Optima CA-106 Smart Gebrauchsanweisung

Control panel / Operation instruction
ON/ OFF (Power)
Press the Power Button to activate the device.
Press the Power Button again, the device turns off.
The device starts in the low speed (position 1) and only the fan function and anion func-
tion is working.
COOLER/ AIR WASHER
Fill the water tank with water first.
Press the button to activate the cooling/ humidifying function.
Cooling/ Humidifying on: the water pump starts to work and the led light is on.
Cooling/ Humidifying off: the water pump stops work and the led light is off.
TIMING OFF/ ON
Press the button to activate the timing function.
The time selection range is 1-24 hours and is shown on the display.
1. In power-on state, press this button to set the working time of the machine. The timer
indicator and time indicator turn on and the digital tube flashes to display the set
time, indicating that it is in the timer setting state. At this moment, you can press the
timer button to set the time, and press any key (except the switch key) or wait 5
seconds to exit the setting. After setting the timer, the digital tube alternately displays
the set timer and current wind speed at 10 second intervals, and the wind speed in-
dicator and time indicator display correspondingly. When the internal timing program
reaches the set time, the machine will shut down and stay in standby state.
2. In power-off state, press this button to preset the desired switch-on time.
While setting the timing, the indicator lights up and the display flashes to show the
current setting time. Wait for 5 seconds to set the setup time successfully.
After the setup time, the display shows the remaining time of the setup time and the
time indicator lights up. When the timer reaches the startup time, the device turns on
and remembers the function before the last shutdown (sleepmode, wind mode).

MODE Button

Press the MODE button to switch between normal wind, natural wind and sleep mode.
1. Normal wind: The fan motor runs at a fixed speed according to the wind speed set by
the user.
2. Natural wind: The fan motor runs irregularly according to the preset program and
can be set to low, medium and strong natural wind in combination with the wind
speed button. Natural wind is to imitate the effect of natural wind, making the air
volume softer and more comfortable. The wind speed level indicator only shows the
initial wind speed status.
The image on the next page shows the working principle of the natural wind mode:
10