Herunterladen Inhalt Inhalt Diese Seite drucken

Clean Air Optima CA-106 Smart Gebrauchsanweisung Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
AI/ AIR-Taste
In the setting AI/ AIR the integrated smart sensor (Intelligent Particle Sensor™) mea-
sures and regulates air quality automatically. The fan, controlled by a sensor anticipates
automatically to what extent indoor air is polluted by particles size PM2.5 and adapting
to the 3 different speeds accordingly.
COOLER/ AIR WASHER + PURIFIER button
Press both buttons for the air cleaning function and the air humidifying function.
COOLER/ AIR WASHER + AI/ AIR button
Press both buttons for the intelligent air cleaning function and the air
humidifying function.
In the setting Auto (AI/AIR) the integrated smart sensor (Intelligent Particle Sen-
sor™) measures and regulates air quality automatically. The fan, controlled by a sensor
anticipates automatically to what extent indoor air is polluted by particles size PM2.5
and adapting to the 3 different speeds accordingly.
Fan Function
Press the Power Button to activate the device. The device starts in the low speed (posi-
tion 1) and only the fan function is working.
Water tank empty signal
Should the water tank be empty, a tenfold acoustic signal sounds. The device will automatically
stop cooling/ air humidifing. In this case, turn off the device with the ON/ OFF button. Refill the
water tank.
If the device is switched on, the acoustic signal is off.
Dry evaporative filter
A. Press the SPEED button for 3 seconds to turn on the dry wind function, the wind will run at
the highest speed (speed 3), the LED light will flash
B. During the operation of the dry wind function, other function keys do not work. Press the
SPEED button again for 3 seconds to exit the dry wind function.
C. After running at high speed for 20 minutes, the device will automatically shut down and
enter standby mode.
Automatic switching off: When the device is normally started and not timed, the device is au-
tomatically switched off after 15 hours if no functions are changed in the meantime.
Anion function: The anion function is switched on when the device starts up and switched off
once the device is switched off.
12
and stay on for 20 minutes.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis