Dab Mode - Blaupunkt FRANKFURT RCM 82 DAB Bedienungsanleitung

FM SENS HI/LO (FM EMPF +/-)
Sets the VHF search sensitivity. HI (+) also tunes to
stations with weak signal, LO (-) tunes only to
local stations with strong signal. This function can
also be activated and deactivated directly using
the LO button (see "CAR RADIO CONTROLS").
FM HICUT OFF, 1, 2, 3 (FM HICUT AUS, 1, 2, 3)
To improve the sound of weak/distorted VHF
station signals (in the case of noises/interference),
you can automatically lower the treble range
according to the reception strength by activating
this function.
RDS AF
When this function is active, the radio always
switches to the best transmission frequency
(alternative frequency). This function can also be
turned on and off directly with the AF button (see
"CAR RADIO CONTROLS").
Tip: this feature must be supported by the radio
station.
Tip: if the AF sign flashes on the display, the car
radio is not receiving AF data because the signal is
too weak.
FM PRESETS (FM
SPEICHEREBENENSPEICHEREBENEN)
Turns memory levels or FM2, FMT sources on/off.
If the SRC button is inactive, the corresponding
memory level cannot be selected with the SRC
button.
DAB PRESETS (DAB SPEICHEREBENEN)
Activates/deactivates memory levels DAB2,
DAB3. If the SRC button is inactive, the
corresponding memory level cannot be selected
with the SRC button.

DAB MODE:

It is used to specify the basic setting of the
multifunction rocker switch in the DAB mode.
Options: SERVICE (default setting) or BROWSE.
Refer to "DIGITAL RADIO OPERATION".
DAB SERVICE SCAN (DAB SERVICE DRY)
Updates the station list to DAB, scans the entire
DAB band and removes multiplexes/services that
cannot be received from the list. This does not
affect memory locations.