Changing The Display - Blaupunkt FRANKFURT RCM 82 DAB Bedienungsanleitung

multiplexes that are not currently available are also
displayed. You can use the menu (see "SETTINGS") to start
DAB SERVICE SCAN that updates the list of multiplexes and
removes inactive multiplexes/services from it.
Tip: you can choose the browsing mode as the default
setting, see "SETTINGS".
Saving services/recalling saved services
Favourite services can be stored under the preset stations
buttons 1-5. Every memory level can store up to 5 stations.
Set the desired service as described above.
Then press and hold the preset station button for a
selected service for more than one second until you can
hear a sound acknowledging that the service has been
saved; after the beep, release the button. You can recall a
saved service by briefly pressing the preset station button.
Playing saved stations/services (P-SCAN)
You can play any station from the selected memory level.
To do this, press and hold the MENU button for more
than one second. The display will show P-SCAN and a
current service.
The P-SCAN message is displayed until cleared by
pressing the button again.
Playing available services (SCAN)
Any available service can be played.
To do this, press and hold the SRC button for more than one
second.
The radio will first update the service list performing a scan,
and then display SCAN and a current service.
SCAN will flash and will go off when the button is pressed
again.

Changing the display

Use the DIS button to toggle between different display
content below.
Service name (station)
•
PTY (program type)
•
Radio text
•
Multiplex name (program package)
•
Memory/memory level + channel
•
Memory/memory level + time
•
Tip: the data display function availability depends on the
service.
Further features/options: see "SETTINGS".