Blaupunkt FRANKFURT RCM 82 DAB Bedienungsanleitung Seite 61

Saving stations automatically (Travelstore)
In the memory levels marked with T (FMT, AMT), you
can store up to 5 stations with the best signal
strength using the automatic search (Travelstore). To
do this, press and hold the FM or AM button for more
than one second until the display shows FM
TSTORE/AM TSTORE.
Tip: if you run Travelstore at another memory level the
system will automatically switch to the Travelstore
memory level and automatically activate it in the
settings if necessary.
Only the stations at the Travelstore memory level are
saved/changed.
Playing saved stations (P-SCAN)
You can play back all stations at the selected memory
level. To do this, press and hold the MENU button for
more than one second until the display shows P-SCAN.
The display will now show P-SCAN and the current
frequency/radio station. The P-SCAN message is
displayed until cleared by pressing the button again.
Playing the available stations (SCAN)
You can play all stations available in the selected
frequency band. To do this, press and hold the SRC
source selection button for more than one second
until the display shows SCAN.
The display shows SCAN and the current radio
frequency/station flashes.
SCAN will flash until the button is pressed again to stop it.
Changing the display
Use the DIS button to toggle between different display
content below.
Station designation
•
PTY (program type)
•
Radio text
•
Memory/memory level + frequency
•
Memory/memory level + time
•
Tip: availability of the specific display function depends
on the selected band, transmitter and reception quality
Further features/options: see "SETTINGS".