Blaupunkt FRANKFURT RCM 82 DAB Bedienungsanleitung Seite 63

Searching for multiplexes
Press the FR or FF buttons to start a search, go back to the
previous multiplex, or skip to the next received multiplex.
The display shows a current channel during the search
until you find a new multiplex.
Tip: this option is not available if PTY is enabled in
the menu (see "SETTINGS").
PTY Search
If the PTY (program type) function is active (see
"SETTINGS"), you can toggle through stations known to
your car radio with the corresponding PTY ID by pressing
the FR/FF buttons (to pre-select the PTY type, see
"SETTINGS").
Searching lists of services/multiplexes (browse mode)
Press and hold or on the multifunction rocker switch
for more than one second to activate the browse mode.
A magnifying glass icon will flash on the display and,
depending on the content being displayed, a folder
symbol (multiplex) or a note symbol (service).
Selecting a new service from a currently selected multiplex
Start the browse mode (the display will now show the note
symbol and a flashing magnifying glass).
Now, press / on the multifunction rocker switch to
browse services from the current multiplex. After finding the
desired service, press >> on the multifunction rocker switch
to play it.
Selecting a new service from a different multiplex than the
one currently being played Start the browse mode (the
display will now show the note symbol and a flashing
magnifying glass).
Press << on the multifunction rocker switch; the car radio
will switch to the multiplex list (the display now shows the
folder symbol and a flashing magnifying glass). Press /
on the multifunction rocker switch to select a multiplex,
press >> to display the services included in the displayed
multiplex (the display now shows a note symbol and a
flashing magnifying glass).
Now, press / on the multifunction rocker switch to
browse services from the current multiplex. After finding the
desired service, press >> on the multifunction rocker switch
to play it.
Exiting the browse mode
The browse mode goes off automatically after 15 seconds if
no button is pressed. Alternatively, press << when
multiplexes are displayed or double press << when services
are displayed to exit the browse mode of the car radio.
Tip: the browse mode displays all services/multiplexes
that are available on the respective car radio; the