Pulmodyne O2-MAX Guard Bedienungsanleitung

Filter
Pulmodyne Inc.
M
2055 Executive Drive
Indianapolis, IN 46241 USA
www.pulmodyne.com
C
2797
*European Union
Latex Free
Filter
Pulmodyne Inc.
M
2055 Executive Drive
Indianapolis, IN 46241 USA
www.pulmodyne.com
C
2797
*European Union
Latex Free
P
Single Patient Use
Made in USA
P
Single Patient Use
Made in USA
REF. A
ATTACHING THE O2-MAX GUARD™ FILTER:
1. Place the smooth side of the O2-MAX Guard Filter onto
the anti-asphyxia housing of the circuit.
2. Snap into place (Ref. A)
3. Ensure the PEEP Valve is fully seated onto the filter
before beginning therapy. (Ref. B)
4. Check for airflow and function as part of circuit check-
out procedure, prior to use.
WARNING: Replace filter at least every 24 hours, or earlier
if increased resistance is noted.
CAUTIONS:
1. Do not resterilize, soak, rinse or reuse.
2. Ensure all connections are secure at all times.
3. Replace unit immediately if there is any contamination, occlusion or any indication
of malfunction.
4. Federal Law (USA) restricts this device to sale by or on the order of a licensed
physician.
REF. A
ATTACHING THE O2-MAX GUARD™ FILTER:
1. Place the smooth side of the O2-MAX Guard Filter onto
the anti-asphyxia housing of the circuit.
2. Snap into place (Ref. A)
3. Ensure the PEEP Valve is fully seated onto the filter
before beginning therapy. (Ref. B)
4. Check for airflow and function as part of circuit check-
out procedure, prior to use.
WARNING: Replace filter at least every 24 hours, or earlier
if increased resistance is noted.
CAUTIONS:
1. Do not resterilize, soak, rinse or reuse.
2. Ensure all connections are secure at all times.
3. Replace unit immediately if there is any contamination, occlusion or any indication
of malfunction.
4. Federal Law (USA) restricts this device to sale by or on the order of a licensed
physician.
REF. B
REF. B