Display And Control Unit; Functions Control Unit - Batavus E-go Bedienungsanleitung

3

Display and control unit

3.1

Functions control unit

A. Turning pedal assistance on and off
To turn the pedal assistance on and off, you use the mode button. You can
turn the pedal assistance on or off at any time, even when you are already
cycling. To turn it on, press the mode button for one second. To turn it off,
press the mode button for three seconds.
B. Changing the pedal assistance level
You can use the
pedal assistance. There are five pedal assistance levels. You can use the
and buttons at any time to indicate whether you want more or less pedal
assistance. When the pedal assistance is first activated, it is set to Level 1.
C. Lights
You can switch between lights on, lights off and automatic lights by holding
the button pressed in for 3 seconds. If you select automatic lighting,
the bicycle light switches on and off automatically. A light sensor constantly
measures the amount of light, and switches the lights on or off accordingly.
The mode selected appears on the bottom left of the screen. However, the
use of lighting is only possible when the electric system has been turned on.
If you only want to use the lighting and not the pedal support, then you can
use the button to switch off the pedal support.
27
and buttons (control unit), you can set the amount of
27