First Start - Tesla RoboStar iQ100 Bedienungsanleitung

5. While charging, the "2" button will flash slowly. This will stop flashing once the battery is fully
charged.

FIRST START

Switch the robot vacuum cleaner on and off with a long press of the "2" button on the robot vacuum
cleaner.
Automatic cleaning
1. Select "ON/OFF" or "Random mode" in the smartphone application, press the "2" button on the
robot vacuum cleaner or press the "4" button on the remote control. When starting cleaning, the
vacuum cleaner should always be located in the charging station.
2. To interrupt cleaning/stop the robot vacuum cleaner, press the "2" button or press the "4" button
on the remote control.
Cleaning along the walls
Select "Cleaning along the walls" in the smartphone application or press the "3" button on the remote
control.
Clean specific location
Place the robot vacuum cleaner in the location you want to clean and select "Clean specific location" in
the smartphone application or press the "9" button on the remote control.
Optimised cleaning
Select "Optimised cleaning" in the smartphone application or press the "5" button on the remote
control. When starting cleaning, the vacuum cleaner should always be located in the charging station.
In this mode, the vacuum cleaner will operate in the programmed mode for efficient cleaning.
Planning cleaning
The robot vacuum cleaner can be programmed to clean automatically once a day, always at the
determined time, even if nobody is home. Plan cleaning in the smartphone application. You can set a
one-off timer or individual plans for any day or days of the week. You can switch off a set timer or
delete it completely. Hold down the selected timer with your finger. After a while, you will be prompted
to delete it, which you then confirm using the OK button.
RETURN TO THE CHARGING STATION
After pressing the "8" button on the remote control, the robot vacuum cleaner will search for the
charging station and start to charge automatically.
WATER MOPPING

Switch off the robot vacuum cleaner using the "2" button and place it away from the charging
station.

Install the blue mopping cloth in the mopping module and fit the module to the robot vacuum
cleaner. Dampen the mopping cloth lightly with water to ensure faster and more fluent mopping.
When removing the mop from the holder, do so carefully to avoid damaging the velcro on the
holder if it is removed too fast. If the mop is dirty after cleaning, you can wash it carefully in
lukewarm water.

Remove the water reservoir from the vacuum cleaner, open the plastic cover and fill the reservoir