VANTRUE Mirror 3 Bedienungsanleitung Seite 15

G-Sensor: You can set the g-sensor values of Forward &
Backward, Leftward & Rightward, Upward & Downward of
the car. The G-sensor value in each direction can be
N E N N E N E E
selected 1/2/3/4/5. The highest sensitivity of G-Sensor is 5.
Battery Low Voltage Protection: When connecting the
hardwire kit, the M3 dash cam will automatically identify the
current car battery voltage. There are 3 protection voltage
thresholds for your choice: 11.8V/12V/12.4V. when the car
battery voltage reaches the protection voltage threshold
which you choose, it will automatically shut down to protect
the car battery.
Low Light Night Vision Parking Mode: The default is Off. When
turned on, it can optimize the recording effect of videos in
parking mode.
Parking Mode: You can choose the parking mode you need,
including Collision Detection/Motion Detection/Low Framer-
ate Mode/OFF.
Exposure: Adjust exposure value for the front lens, +2.0,
+1.6,+1.3,+1.0,+0.6,+0.3,+0.0,-0.3,-0.6,-1.0,-1.3,-1.6,-2.0
optional. The default value is +0.0.
Frequency: 50Hz/60Hz available.
Device Sound: Set the volume of the device, such as the
startup sound, prompt sound, button sound, and video
playback sound. You can select off, low, Medium, or high.
The default value is Medium.
Warning Tone: Turn on or off the operation prompts, such as
Format Reminder setup Tone, Video Locked Prompt Tone,
Abnormal Video Recording Stopped Prompt Tone, Touch
Tone, and ON & Off Tone. Default is ON.
Auto LCD Off: 1Min/3Min/5Min/ OFF optional. Default is OFF.
If it is set to Off, it will keep the screen always on.
LCD Brightness: You can select off, low, Medium, or high.
Reversing Setting: Set the Reverse Image, Reverse Assist Lines
and Reverse preview Settings.
Reversing Setting: Set the Reverse Image, Reverse Assist Lines
and Reverse preview Settings.
- 11 -