SICK CSX High Speed Betriebsanleitung Seite 27

8028099/2023-03-09 | SICK
Irrtümer und Änderungen vorbehalten
Address Content
147 Local user inter‐
face lock
148 Sender configu‐
ration
149 Pin 2 configura‐
tion
150 Pin 5 configura‐
tion
151 Find me
152 Energy saving
mode for display
153 Turn display
154 Measurement
averaging
155 Output mode
156 Distance regula‐
tion enabled
157 Color mode
158 Quality of run
alarm threshold
160 Qint. 1 teach
data
182 Qint. 1 configu‐
ration
184 Qint. 2 teach
data
#Registers Ref. IO- Comment
Link
Index
1 12 / 4 + 0 = Interface unlocked
160 1 = Interface fully locked
2 = Teach-in available
1 97 0 = Sender active (default)
1 = Sender not active
1 121 0 = Deactivated
39 = Switching output QL1
34 = Switching output QL2
Standard inputs:
1 = External input (Smart Task)
Device specific:
20 = Blanking
80 = Single value teach QL1
81 = Single value teach QL2
90 = Activate job bank (LSB)
1 122 0 = Deactivated
Standard inputs:
1 = External input (Smart Task)
Device specific:
20 = Blanking
80 = Single value teach QL1
81 = Single value teach QL2
90 = Activate job bank (MSB)
1 204 0 = Deactivated (default)
1 = All LEDs blink with 1 Hz
16 = All LEDs + QLs blink with 1 Hz
1 234 / 1 0 = Off
1 = On (default)
1 234 / 2 0 = Not turned (default)
1 = Turned
1 89 0 = no averaging
1 = low averaging
2 = medium averaging
3 = high averaging
4 = highest averaging
1 293 0 = Standard (default)
1 = Best fit
2 = Coded
1 294 0 = Deactivated
1 = Activated (default)
1 295 0 = C + I mode
1 = C mode
2 = I mode
1 176 Threshold position in percent.
0 - 90 (Default: 50)
22 60 Teach data content for a Qint1.
2 61 Link to the teach object for which the Qint
is configured. Qint1 = 0, Qint24 = 23 and
ssensitivity of respective Qint.
22 62 Teach data content for a Qint2.
B E T R I E B S A N L E I T U N G | CSS/CSX High Speed
6
INBETRIEBNAHME
27