Installation
• Place the hob on a stable, smooth surface (use the packaging
as a base, for example), taking care not to exert any pressure
on the elements protruding from the hob.
Screw the 4 installation brackets supplied (L) to the underside
of the hob as shown in the illustration.
• Open the waterproof caps from the connection openings on the
underside of the hob, connect the power cable of the extractor and
secure it with the lock (M) as shown in the illustration.
Note: To clean the appliance, remove the power cable and close
the openings at its ends with the caps.
M
L
45