Bosch GCM 18V-216 D Professional Originalbetriebsanleitung Seite 34

34 | English
LED
4 × continuous green light
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × flashing green light
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50 °C. Do not leave the battery in your car in the summer, for
example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Items included
See the list of items included at the start of the
operating manual.
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Sliding mitre saw with fitted saw blade
– Clamping wheel (45)
– Adjustable fence (26)
– Screw clamp (41)
– Hex key/slotted screwdriver (43)
– Dust bag (37)
– Workpiece supports (24) (2 pieces)
Note: Check the power tool for possible damage.
Before continuing to use the power tool, carefully check that
all protective devices or slightly damaged parts are working
perfectly and according to specifications. Check that the
moving parts are working perfectly and without jamming;
check whether any parts are damaged. All parts must be fit-
ted correctly and all the conditions necessary to ensure
smooth operation must be met.
If the protective devices or any parts become damaged, you
must have them properly repaired or replaced by an author-
ised service centre.
1 609 92A 8HU | (20.12.2022)
Fitting individual components
Capacity
– Carefully remove all parts included in the delivery from
60–80 %
their packaging.
40–60 %
– Remove all packing material from the power tool and the
20–40 %
accessories provided.
5–20 %
– For ease of assembly when fitting the tool elements that
0–5 % are provided, be aware that the power tool is supplied in
the transport position.
Installing Workpiece Supports (see figure A1)
The workpiece supports (24) can be positioned left, right or
in front of the power tool. The flexible connector system en-
ables a multitude of extension or expansion variants (see
figure G).
– Insert the workpiece support (24) into the openings (47)
on the power tool or into the openings (48) of the second
workpiece support as required.
Never carry the power tool using the workpiece sup-
u
ports.
Only use the transport devices to transport the power
tool.
Fitting the Clamping Wheel (see figure A2)
The clamping wheel (45) fixes the selected bevel angle and
is required for safe operation.
– Unscrew the hex nut from the threaded bolts (49).
– Screw the clamping wheel (45) clockwise onto the
threaded bolts (49) and tighten it.
Fitting the Adjustable Fence (see figure A3)
The adjustable fence (26) must be fitted before sawing.
– Slide the fence (26) on the right of the saw blade into the
corresponding groove and tighten the locking screw (44).
The levelled side of the fence must face inwards towards
the saw blade.
Stationary or flexible mounting
To ensure safe handling, the power tool must be
u
mounted on a flat, stable work surface (e.g. work
bench) before use.
Mounting on a work surface (see figure B1−B2)
– Use suitable screw fasteners to secure the power tool to
the work surface. The holes (13) are used for this pur-
pose.
or
– Firmly clamp the base of the power tool to the work sur-
face with commercially available screw clamps.
Mounting on a Bosch saw stand
With the height-adjustable legs, Bosch GTA saw stands
provide firm support for the power tool on any surface. The
workpiece supports of the saw stand are used for underlay-
ing long workpieces.
Read all the warnings and instructions included with
u
the saw stand. Failure to observe the warnings and fol-
low instructions may result in electric shock, fire and/or
serious injury.
Bosch Power Tools