Continuous Drainage; Fault Code - Electrolux EXP26U339AW Benutzerhandbuch

16 www.electrolux.com
To manually initiate the onboarding process.
Press " " for 5 seconds.
Note: Download our Electrolux App
and follow the step-by-step onboarding
instructions to connect the air conditioner to
the App.
Bluetooth
The unit uses Bluetooth when onboarding.
Ensure you have your mobile phone's
Bluetooth turned on to connect the air
conditioner to the App.
Scheduler
Shows a scheduled event from the app is
running.

7.2 Fault code

If the display reads "AS", the ambient
temperature sensor has failed. Contact your
Authorized Electrolux Service Center.
If the display reads "ES", the evaporator
temperature sensor has failed. Contact your
Authorized Electrolux Service Center.
If the display reads "L3", the condenser
DC fan motor has failed. Contact your
Authorized Electrolux Service Center.
If the display reads "P1", bottom tray is full.
Turn off and unplug the unit, then carefully
move the unit to a drain location. Remove
the bottom drain plug and let the water drain
away. Restart the unit until the "P1" symbol
disappears. If error repeats, call for service.
If the display reads "E4", the communication
between display PCB and main control PCB
is faulty. Contact your Authorized Electrolux
Service Center.
7.3 Drainage instruction

Continuous Drainage

During the Dry mode or Heat pump
mode, you will need a garden hose (sold
separately) or drain hose to drain the
condensate from the unit.
Follow the steps below:
• Unscrew the drain cap of continuous
drain outlet (Fig. 8).
• Connect one end of the garden hose (sold
separately) or drain hose to the drain
outlet then lead the other end into a drain
that is lower than the unit (Fig. 9).
Note:
• Condensate may flow out after removing
the drain cap, if the unit is running in Cool
or Auto mode. When you want to remove
the garden hose, prepare a drip tray (not
supplied) to collect the condensate from
the drain outlet.
• Please be sure that the height of the drain
and section of the drain hose should not
be higher than that of the drain outlet, or
the continuous drainage may not work
properly.
• During Cool or Auto mode, it is
recommended to disable continuous
drainage by replacing the drain cap to
the drain outlet, to reach the maximum
performance.
(Fig. 8)
Drain cap
for Dry mode
Drain cap
for Heat Pump mode
(Fig. 9)
Garden hose
Drain hose