ATH-Heinl Single Lift 12PL Bedienungsanleitung Seite 82

3. If necessary, place the adapters for vehicles with different track widths
4. Drive the vehicle onto the platforms, paying attention to the load distribution
5. To ensure that the vehicle cannot move during the work, additionally secure it with tension belts between
the platforms and wheels
Lifting
1. Switch on the lifting platform at the main switch
2. Raise the car to a height of 100-150 mm and stop lifting by releasing the Lift button
3. Check if the car is safely on the lifting platform
4. Then continue lifting and observe lifting process
Park position
1. From a lifting height of 500 mm, a safety catch automatically engages
2. By pressing the Park button for a few seconds, the lifting platform lowers to the nearest detent. Make sure
that the platforms are at the same height
Lowering
1. Before lowering, check if there are any objects under the car
2. Press the Lower buttons. If the lift does not lower and a lift truck is in the safety catch, press the Lift button
for approx. 2 seconds to raise the lift so that the catches can unlock. Then press the Lower button.
Finish
1. Lower the platform completely
2. Drive out with the vehicle
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
82
Release date: 02.05.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG