The Osd Menu; Menu Picture; Menu Sound - Medion MD 30036 Bedienungsanleitung

The OSD menu

The OSD in the LCD TV Mode will be described in the following. Other options, which you can look up from Page 21, will be
available to you in the PC Mode.
Note
The Menus described here can deviate from those on your screen because of possible technical changes.

Menu PICTURE

Menu point
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
COLOR
SCALE

Menu SOUND

Menu point
BASS
TREBLE
BALANCE
MTS
SOUND MODE
EQUALIZER
18
Setting
Reduce or increase the contrast (0 – 100).
Reduce or increase the brightness (0 – 100).
Reduce or increase the colour intensity (0 – 100). (only in the case of NTSC)
Reduce or increase the saturation (0 – 100).
Reduce or increase the sharpness (0 – 100).
NORMAL: Normal colouring.
WARM: Increases the proportion of warm colours.
COOL: Increases the proportion of cold colours.
AUTO: The format transmitted will be set to the input signal automatically or a full
picture will be presented.
16:9: The picture will be presented in the 16:9 format.
ZOOM1/ZOOM2: Enlarged presentation.
4:3: The picture will be presented in the 4:3 format.
PANORAMA: The 4:3 picture will be stretched at the left and right edges, in order to
fill the screen; the upper and/or the lower edge will be rather cut off at the same time.
Setting
Setting the bass tones (0 – 100).
Setting the high tones (0 – 100).
Setting the balance between the left and the right loudspeakers (0 – 100).
Switching between Mono / Stereo
USER: the Tone Mode set by the user in the 'EQUALIZER' Menu.
STANDARD: Standard setting.
MOVIE: Increases the film sound.
MUSIC: The optimized setting for music.
You will select a frequency band (120 Hz, 500 Hz, 1K5 Hz, 5K Hz, 10K Hz) with
You will set the value of the frequency band selected with
English
/ .
/ .