Setting the picture
Picture format
You will be able to switch between the following picture formats with the
•
AUTO: The format transmitted will be set to the input signal automatically or the full picture will be presented.
•
16:9: The picture will be presented in the 16:9 format.
•
ZOOM1/ZOOM2: Enlarged presentation.
•
4:3: The picture will be presented in the 4:3 format.
•
PANORAMA: The 4:3 picture will be stretched at its left and right edges, in order to fill the screen; the upper and lower
edges will be rather reduced at the same time.
Picture setting
•
You will choose between the STANDARD, MOVIE, VIVID and USER and Picture Modes with
the
button [22].
Displaying information
•
Press the
[17] button, in order to have the channel position and the sound mode displayed.
•
You will receive the same information if you switch to a different channel.
Selecting the signal source
•
You will call up the list of the available sources with the TV/AV / INPUT button on the device or the
the remote. The following sources of a signal will be available to you:
•
PC:
Device at the VGA socket
•
HDMI:
Device at the HDMI socket
•
TV:
TV or aerial operation
•
SCART1:
Device at the SCART connection 1
•
SCART2:
Device at the SCART connection 2
•
YPBPR1:
Device at the Component connection 1
•
YPBPR2:
Device at the Component connection 2
•
You will switch between the sources of reception with the CH +/CH - buttons on the device or the
buttons on the remote.
Picture Format button [14]:
Basic functions
DE
EN
NO
FI
DK
SE
button [6] on
/
directional
15