Menu Tv-Channel; Video Recorder Manual Storage - Medion MD 30036 Bedienungsanleitung

Menu TV-CHANNEL

Menu point
COLOR SYSTEM
SOUND SYSTEM
APS
MANUEL
PROGRAM
FINE TUNING
AFT
PROGRAM AREA Setting the reception area according to the sound norm during the automatic chan-

Video recorder manual storage

For example, you can use the manual search to set a video recorder to the LCD TV.
Set your video recorder to the test signal after the LCD TV and the video recorder have been connected to each other by means
of the aerial (compare Page 8).
•
Carry out the manual search with the LCD TV.
•
Store the test signal on channel position 0 (this channel position will not be occupied by a television channel), when the
signal has been found.
20
Setting
Auto, PAL, NTSC, SECAM, PAL M, PAL N, NTSC 4.42
Auto, B/G, I, D/K, L, LL, M
Automatic channel search
You will be able to carry out a manual channel search here.
1. Select the channel position under the CHANNEL point.
2. Go to the SEARCH option and start a search of the frequency band down-
wards or upwards with the
the STORE option will be marked each time that a channel is found.
3. Store the channel with OK. .
You will be able to make a further fine tuning in the FINE TUNING Menu point (see
below).
You will see the channels currently stored in the channel table.
Changing the channel name:
1. Go to the channel position required and press the red NAME colour button.
Now, you will be able to change the initial letters: select a symbol with the
directional buttons. The symbols will appear in the sequence of: A B C
[to] Z 0 1 2 [to] 9 ( ) * + , . / [BLANK] –. You will be able to enter up to a maxi-
mum of 5 symbols.
2. Go to the next letter and so on with the
3. Press the OK colour button again at the end, in order to store the name.
Deleting a channel:
1. Select the channel that you want to delete from the list and press the green
DELETE colour button. The following channels will move up the table.
Entering a channel:
You will be able to shift a channel to a different position here.
1. Select the channel and press the yellow INSERT colour button.
2. Shift the channel to the required position with
our button. The other channels will be shifted with it accordingly.
You will be able to make a fine adjustment to the channel currently selected with
here.
Automatic fine tuning. The automatic fine tuning will start, in the case of a deteriora-
tion of the signal, if this option is switched on.
nel search. Select between OTHER (all sound norms with the exception of L/L'),
BOTH (all sound norms inc. L/L'), FRANCE (only the L/L' sound norm).
directional buttons. The search will stop and
directional button.
English
and press the red OK col-