Herunterladen Inhalt Inhalt Diese Seite drucken

The Osd Menu; Menu Picture; Menu Sound; Menu Channel - Medion MD 30016 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The OSD menu

The OSD in the LCD TV Mode will be described in the following. Other options, which you can look up from Page 20, will be
available to you in the PC Mode.
Note
The Menus described here can deviate from those on your screen because of possible technical changes.

Menu PICTURE

Menu point
PICTURE MODE
BRIGHTNESS
CONTRAST
SATURATION
HUE
SCALE

Menu SOUND

Menu point
SOUND MODE
VOLUME
BASS
TREBLE
BALANCE

Menu CHANNEL

Menu point
COLOR SYSTEM
AUTO TUNE
MANUAL TUNE
FINE TUNE
18
Setting
NORMAL: Standard setting
SOFT: Setting in the case of a dark environment
VIVID: Setting for a reproduction rich in contrast
USER: The picture mode set by the user in the PICTURE menu.
Reduce or increase the brightness (0 – 100).
Reduce or increase the contrast (0 – 100).
Reduce or increase the saturation (0 – 100).
Reduce or increase the colour intensity (0 – 100). (only in the case of NTSC)
AUTO: The format transmitted will be set to the input signal automatically or a full
picture will be presented.
FULL: The picture will be presented in the 16:9 format.
ZOOM1/ZOOM2: Enlarged presentation.
4:3: The picture will be presented in the 4:3 format.
PANORAMA: The 4:3 picture will be stretched at the left and right edges, in order to
fill the screen; the upper and/or the lower edge will be rather cut off at the same time.
Setting
USER: the sound mode set by the user in the 'SOUND Menu.
MOVIE: Increases the film sound.
NEWS: The optimized setting for music.
NORMAL: Standard setting.
Setting the volume (0 – 100).
Setting the bass tones (0 – 100).
Setting the high tones (0 – 100).
Setting the balance between the left and the right loudspeakers (0 – 100).
Setting
Auto, PAL, NTSC, SECAM, PAL M, PAL N, NTSC 4.42
Automatic channel search
You will be able to carry out a manual channel search here.
1. Select the channel position under the CHANNEL point.
2. Go to the SEARCH option and start a search of the frequency band down-
wards or upwards with the
time that a channel is found.
3. Go to the STORE entry and save the channel with OK.
You will be able to make a further fine tuning in the FINE TUNE Menu point (see
below).
You will be able to make a fine adjustment to the channel currently selected with
directional buttons. The search will stop each
E E
N N G G L L I I S S H H

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Md 30039Md 30034

Inhaltsverzeichnis