Display Unit Seb2 / Seb2.2; Display, Operating Elements - Drivetest Fm300 Handbuch

Drive Test GmbH München
3

DISPLAY UNIT SEB2 / SEB2.2

The display unit is used to display, evaluate and store the measurements. A short guide to
measure is attached to the back of the display unit.
The functions of the display unit are:

Controlling measurements

Storing measurements

Display measured peak force and evaluate measurements

Upload measured data to a PC
3.1

DISPLAY, OPERATING ELEMENTS

The display unit elements are three LEDs and a 3.5 digits LCD display.
The meanings of the LEDs are:
! State LED

Result LED: not OK
 Result LED: OK
There is one button to operate the display unit:
 Operating button
Version 7.1
Handbuch / Manual FM300 Seite 65 von 100
Archiv: FM300_DE_EN_V7.1