Sensor Data; Sensor Maintenance - Drivetest Fm300 Handbuch

Drive Test GmbH München
2.5

SENSOR DATA

Basic sensor specific data is stored in a non-volatile memory (EEPROM), situated in the
sensor's connector (15-pol. Sub-D):

Force adjustment data

Sensor ID, version, serial no.

Guidelines category

Date of last calibration

Number of measurements
2.6

SENSOR MAINTENANCE

The device has to be protected from moisture, dirt and solar radiation. It is designed to
withstand normal handling and transportation, nevertheless excessive shock or load
(>2500 N) can damage it and should be avoided. Most of the parts are fabricated from
durable aluminium or POM. To clean the device, wipe it with a damp cloth. Avoid contact to
acids and thinner.
Version 7.1
Handbuch / Manual FM300 Seite 63 von 100
Archiv: FM300_DE_EN_V7.1