Haier HSW59F18EIMM Bedienungsanleitung Seite 27

1. Release the left side of two water
couplers on the front left corner at the
bottom of appliance: press and hold in the
collar as shown and remove the water
pipe.(Fig.10.10-1).
2. Undo the hinge cover screw and remove
the cover (Fig.10.10-2). When removing the
freezer door, disconnect all wires except for
the grounding wire.
3. Undo the screws holding the upper hinge
in position and then remove the hinge
(Fig. 10.10-3).
4. Lift the door to remove it (Fig.10.10-4).
When removing the freezer door, lift it high
enough to pull out the water connection
from the bottom of the appliance.
5. Refit the door by reversing the removal
steps. Ensure that the grounding cable will
be fixed by the screw.
6. Refit the water connection.
Equipment
EN
27