Haier HSW59F18EIMM Bedienungsanleitung Seite 20

Hold for 3s
Filter function
Water intake function
EN When the display screen is unlocked, press the "H1" water intake function button
once, the buzzer will ring, the water intake indicator icon "h1" will light up, and the
water intake function of the refrigerator will start. When the water intake indicator is
on, press the "H1" water intake function button, the buzzer will ring, the water intake
indicator "h1" will go out, and the water intake function of the refrigerator will be
turned off.
NOTICE
When the water intake exceeds the water intake warning time (150s), the buzzer
1.
will start to alarm (Dingdong), and when the water intake protection time (180s) is
exceeded, the water intake protection status will be triggered;
After the protection state is triggered, the water intake protection recovery time
2.
(200s) will not be discharged by pressing the water intake microswitch; After the
recovery time of water intake protection, press the water intake microswitch to
resume water intake. Under the protection status, press the distributor press
button to make a prompt sound (Ding Dong Dong).
Count back for 10 minutes from the beginning of water intake. If the cumulative
3.
water intake exceeds 5 minutes within this 10 minutes, the water intake protection
will be forced to stop for 10 minutes, and the water intake will be resumed after
10 minutes. If the accumulated water intake does not exceed 5min within 10min,
the timing will be reset, and the timing will be restarted after the water intake again.
This cycle control. Under the protection status, press the distributor press button
to make a prompt sound (Ding Dong Dong).
Press 1 time
20
Use
Indicator on
Ice making function on Hold for 3s
Indicator on
Water intake function on
Indicator off
Ice making function off