Therabody SmartGoggles Bedienungsanleitung Seite 9

Charging
•
SmartGoggles are USB-C enabled
• SmartGoggles include a Therabody USB-C to USB-A cable.
•
The USB port is located on the side of the device, behind the
Power Button.
• Ensure that the battery status LED light is OFF before charging.
•
Insert the USB-C cable into the port to charge SmartGoggles.
•
The battery level is displayed in the LED indicator on the battery,
next to the USB-C connector:
Orange: low charge, Blue: mid charge, Green: fully charged.
•
When charging, the LED will flash to indicate it is properly
•
connected and will turn solid green when complete.
Note: If using a charger from a third party, ensure that it is from
a certified manufacturer and has not suffered any structural
damage. Do not try to use the device while charging.
EN
9