Safety Instructions - Klarstein BORNHOLM CURVED SMART Bedienungsanleitung

SAFETY INSTRUCTIONS

Read and follow all the instructions in this manual even if you feel you are familiar with
the product, and find a place to keep it handy for future reference. Read all instructions
before using this appliance and keep them for future reference. When using any
electrically powered product, basic safety precautions should always be followed,
including the following:
• Use only the voltage specified on the rating plate of the heater.
• Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the
appliance may overheat and become a fire risk.
• Do not cover grilles, block entry or exhaust of airflow by placing appliance against
any surface. Keep all object at least 1 meter from the front, side and rear of the
appliance.
• Do not place the appliance close to a radiant heat source.
• Do not operate in areas where gasoline, paint or other flammable liquids are used
or stored.
• This appliance becomes hot during use. Do not allow bare skin to touch the hot
surface. Switch off and allow to cool before moving.
• Do not use the appliance to dry clothes.
• Do not insert or allow foreign object or metal utensils to enter any ventilation
or exhaust opening, as this may cause an electric shock, fire or damage to the
appliance.
• Do not immerse in liquid or allow running into the interior of the appliance, as this
could create an electrical shock hazard.
• Do not reach for an appliance that has fallen into water. Switch of at supply and
unplug immediately.
• Do not operate any appliance with a damaged cord, plug or after the appliance
malfunctions or has been dropped or damaged in any manner. Return to a qualified
electrical person for examination, electrical or mechanical adjustment, service or
repair.
• Do not operate appliance with wet hands.
• The most common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning air vents and grilles.
• Always remove plug from the mains supply before cleaning. Do not use a abrasive
cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot
soapy water only.
• Do not connect the appliance to the mains voltage until completely assembled and
adjusted.
EN
21