2.
Screw nozzle adapter (11) in adapter
nozzle (6).
3.
Press the adapter in the valve opening
and pump.
Objects with more volume
Adapter nozzle (5) can be put in an air valve
and used on objects with more volume.
1.
Press in the lock arm on the pump nipple,
fasten the adapter nozzle in the pump
nipple and release the lock arm.
2.
Screw nozzle adapter (11) in adapter
nozzle (5).
3.
Press the adapter in the valve opening
and pump.
Cleaning nozzle
The extension nozzle (8) is used to clean
areas difficult to reach and for cleaning dirty
equipment. The smooth action trigger enables
precise dosing of the compressed air. To use
the extension nozzle the hose with the pump
nipple must first be unscrewed from the gun
with the pressure gauge. The extension nozzle
is then screwed into the gun with pressure
gauge.
MAINTENANCE
•
Never open the appliance, it is
maintenance-free.
•
The appliance must be repaired by an
authorised service centre.
WARNING!
•
RISK OF PERSONAL INJURY. Switch off
the appliance and pull out the plug
before working on the appliance.
•
Do not use sharp objects to clean the
appliance.
•
Do not allow any liquid to get into the
appliance, this could damage the
appliance.
•
Make sure the appliance has cooled
down completely, otherwise there is a
risk of getting burned.
•
Release all pressure from the appliance
before cleaning and maintenance. Use
the blowout valve for this until no more
air comes out.
CLEANING
•
Clean the appliance regularly, preferably
every time it has been used.
•
Clean the appliance casing with a dry
cloth. Make sure that no water gets into
the appliance.
NOTE:
Do not use petrol, solvents or detergents that
can damage the plastic.
STORAGE
Before putting the appliance away make
sure there is no compressed air in it or the
accessories. Pull out the plug and make
sure there is no compressed air in it or the
accessories.
NOTE:
•
Store the appliance in a dry and safe
place.
•
Store the appliance where it cannot be
used by unauthorised persons.
EN
31