Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Meec tools 012893 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33
EN

SAFETY INSTRUCTIONS

INTENDED USE
The appliance is designed to pump up bike
tyres, inflatable mattresses, footballs, rubber
boats etc. together with the supplied adapters.
All other use or modification of the appliance
is inappropriate and can put safety at risk. The
manufacturer cannot accept liability for any
damages resulting from improper usage. The
appliance is not intended for commercial use.
NOTE:
Always keep the instructions near the
compressor and readily available for the
operator.
GENERAL SAFETY INSTRUCTIONS
WARNING!
Read all the safety instructions and other
instructions.
Failure to follow the safety instructions and
other instructions can lead to electric shock,
fire and/or severe personal injury. Save all
safety instructions and other instructions for
future reference.
"Power tools" in the safety instructions refers to
mains powered compressors.
WORKPLACE SAFETY
Keep the work area clean and well lit.
Dark and cluttered work areas increase
the risk of accidents and injuries.
Do not work with this power tool in areas
where there is a risk of explosion, and
where there are flammable liquids, gas or
dust. Power tools produce sparks that can
ignite dust and fumes.
Keep children and other persons at a safe
distance when using the power tool. You
can lose control of the appliance if you are
distracted.
26
ELECTRICAL SAFETY
The plug for the power tool must fit
properly into the power point. The plug
must not be modified in any way. Do not
use adapter plugs together with earthed
power tools. Unmodified plugs and
matching outlets reduce the risk of electric
shock.
Avoid body contact with earthed surfaces
such as pipes, radiators, cookers and
refrigerators. There is an increased risk of
electric shock if your body is earthed.
Do not expose power tools to rain or
moisture. There is a greater risk of electric
shock if water gets into a power tool.
Do not use the power cord to carry or hang
up the power tool, or to pull the plug out
of the power point. Keep the power cord
away from heat, oil, sharp edges and
moving parts. A damaged or tangled cord
increases the risk of electric shock.
If it is not possible to avoid using the
power tool in damp conditions, use a
residual current device RDC. Using an RCD
reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, pay attention to what you are
doing, and use your common sense when
working with a power tool. Do not use a
power tool if you are tired or under the
influence of drugs, alcohol or medication. A
moment of inattention when using a power
tool can result in serious personal injury.
Wear personal safety equipment and
safety glasses. Using personal safety
equipment such as a dust filter mask,
non-slip safety shoes, safety helmet or ear
protection (depending on the type and
how the power tool is used), reduces the
risk of personal injury.
Avoid accidental starting. Make sure the
power tool is switched off before
connecting it to the power supply and
before picking it up or carrying it. If you
have your finger on the power switch
when carrying the power tool, or plug it

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis