Meec tools 012893 Bedienungsanleitung Seite 27

into a power point when it is switched on,
this can result in an accident.
• Remove all Allan keys/spanners etc.
before switching on the power tool. A tool
or key left in a rotating part of the
appliance can result in personal injury.
• Avoid awkward postures. Always maintain
a firm footing and good balance. This will
give you better control over the tool in
unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothes or jewellery. Keep
your hair, clothing and gloves away from
moving parts. Loose-fitting clothing,
jewellery or long hair can get caught in
moving parts.
• If dust extraction devices can be fitted,
make sure they are properly connected
and used. The use of dust extraction can
reduce the risks associated with dust.
USING AND HANDLING POWER
TOOLS
• Do not overload the machine. Use the
right power tool for the job. The use of the
right tools means you work better and
more safely within the specified power
range.
• Do not use a power tool with a faulty
switch. A power tool that cannot be
switched on or off with the power switch is
dangerous and must be repaired.
• Pull out the plug from the power point
before making any adjustments, changing
accessories, or putting down the
appliance. This precaution avoids
accidental starting of the power tool.
• Store power tools not in use out of the
reach of children. Do not allow persons who
are unfamiliar with the appliance, or who
have not read these instructions, to use the
appliance. Power tools are dangerous if
used by inexperienced persons.
• Keep power tools in good condition.
Check that moving parts function properly
and do not jam, and that no parts are
defective or damaged. Have damaged
parts repaired before using the appliance.
Many accidents are a result of poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Carefully maintained cutting tools with
sharp edges to not fasten as easily and
are easier to control.
• Use the power tool and accessories, etc. in
accordance with these instructions. Take
into account the working conditions and
the work that is to be done. Using power
tools for purposes they are not intended
to be used for can result in dangerous
situations.
SERVICE
• The power tool must only be repaired by
qualified personnel using original spare
parts. This will ensure that the power tool
remains safe to use.
• The plug and power cord must only be
replaced by the manufacturer or an
authorised service centre. This will ensure
that the power tool remains safe to use.
SAFETY INSTRUCTIONS SPECIFIC TO
THIS APPLIANCE
• This appliance must not be used by
children or persons with diminished
physical, sensorial or mental capacities, or
who lack experience or knowledge. Do
not allow children to use the appliance as
a toy. Cleaning and maintenance must
not be carried out by children.
• Avoid using the compressor at
temperatures below +5°C.
• Never leave the compressor unattended
when in use.
• Make sure the power switch is switched off
before plugging the appliance into a
power point.
• Caution: Only use the compressor for
short periods. The appliance can overheat
if it is run continuously for more than 10
minutes. Switch off the appliance
immediately and allow it to cool for at
least 10 minutes.
EN
27