Atag OX4511C Bedienungsanleitung Seite 120

USE
Oven lighting
Oven lighting is switched on automatically when the door is opened or when the
oven is switched on.
After the end of the cooking process, the light will remain on for another minute.
The light inside the oven can be switched on or off by pressing the LIGHT key.
5sek
Acoustic signal
5sek
The cooking system selector knob should be on the »0« position. Press the
+
used.
After a power outage or after the appliance is switched off, the additional function
settings will remain stored for no more than a few minutes. Then, all settings, except for
the acoustic signal and child lock will be reset to factory defaults.
EN 20
Loudness of the acoustic signal can be set when no timer function is activated
(only the time of day is displayed). Press the TEMPERATURE/POWER key and
hold it for 5 seconds. Two fully lit bars will appear on the display. Rotate the
SETTINGS KNOB (-/+) to choose one of the three volume levels (one, two, or
three bars). After three seconds, the setting will be automatically stored and the
time of day will appear.
Decreasing the display contrast
LIGHT key and hold it for 5 seconds. Two fully lit bars will appear on the display.
Rotate the SETTINGS KNOB (-/+) to adjust the display dimmer (one, two, or
three bars). After three seconds, the setting will be automatically saved.
Standby
Display lighting can be automatically switched off after 10 minutes if it is not
Press the KEY + TIMER keys to switch off the display. If a timer function has
been activated, then »OFF« and the TIMER icon will appear on the display to
indicate the activated function.