Specifications - Makita BTD044 Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 Display
8 Indication button
9 Indicatiing lamp
10 Sleeve

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Overall length
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
6
Explanation of general view
11 Bit
12 Bit-piece
13 Standard bolt
14 Fastening torque
15 Fastening time
16 Seconds
17 Number of impacts (Presetting
number)
18 High tensile bolt
19 Limit mark
Model
Machine screw
Standard bolt
High tensile bolt
–1
)
Net weight
BTD044
4 mm – 8 mm
5 mm – 10 mm
5 mm – 6 mm
0 – 2,300
0 – 3,500
144 mm
BL1430A/
BL1415NA
1.2 kg/1.0 kg
D.C.14.4 V
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
ENE033-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
GEA010-1
injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before
instructions and cautionary markings on (1)
GEB054-1
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
20 Rear cover
21 Screws
22 Spring
23 Recessed part
24 Arm
25 Carbon brush cap
26 Lead wire
27 Spacer
28 Hole
BTD064
4 mm – 8 mm
5 mm – 12 mm
5 mm – 10 mm
0 – 2,500
0 – 3,500
144 mm
BL1430A/
BL1415NA
1.3 kg/1.1 kg
D.C.14.4 V
using battery cartridge,
BTD104
4 mm – 8 mm
5 mm – 12 mm
5 mm – 10 mm
0 – 2,700
0 – 3,500
144 mm
BL1430A/
BL1415NA
1.3 kg/1.1 kg
D.C.14.4 V
ENC007-7
read all