Technical Data - Husqvarna FS400LV Bedienungsanweisung

open flames, for example from electrical devices or
boilers, can start a fire.
• Always use approved containers for transportation of
fuel.
• Examine new cutting blades for transport damage.
To lift the product
WARNING:
equipment has the correct dimension. The
rating plate on the product shows the
product weight.
WARNING:
eye is not damaged. Do not use metal
hooks, chains or other lifting equipment with
rough edges that can cause damage to the
lifting point.
WARNING:
or near a lifted product.
• Use correct lifting equipment to lift the product. Do
not lift the product manually.
• Use the lifting eye that is attached to the product
when you lift it.
1
Engine
Engine power, kW/hp@rpm
Blade guard capacity, mm/in.
Max. cutting depth, mm/in.
Product weight with empty tanks, kg/lb
Operating weight, kg/lb
Dimensions (LxWxH), mm/in.
Max. rotation speed of the spindle, rpm
Arbor size, mm/in.
Blade flange diameter, mm/in.
Blade coolant
1
For further information and questions about the specific engine, refer to the engine manual or the web site of
the engine manufacturer.
2
As specified by engine manufacturer. Net power rating as per SAE J1349, at specified rpm.
20
Make sure that the lifting
Make sure that the lifting
Do not walk or stay below

Technical data

Honda GX390
2
8.7/11.7 @3600 rpm
450/18
162/6.5
104/229
142/313
1090x615x9
90/42.9x24.2
x39.0
• Use boots with steel toe-caps and non-slip soles.
Storage
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Always keep the product indoors.
• Keep the product in a dry and frost free area.
• Remove the cutting blade from the product after the
operation.
• Keep the cutting blades in a safe area to prevent
damage.
• Keep the cutting blades in a dry and frost-free area.
• Examine new cutting blades for storage damage.
• Keep the product on a flat, level surface.
• Remove all fuel from the fuel tank before you put the
product in storage for a long period of time. Discard
the fuel at an applicable disposal location.
• Always use approved containers for storage of fuel.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
Kohler CH440
8.7/11.7 @3600 rpm
500/20 450/18
187/7.5 162/6.5
107/236 104/229
145/320 142/313
1120x615x9 1090x615x9
90/44.1x24.2 90/42.9x24.2
x39.0 x39.0
3100
25.4/1
89/3.5
Water
Husqvarna
HH 389MPC
8.2/11.0
@3600 rpm
500/20 500/20
187/7.5 187/7.5
107/236 105/231
145/320 143/315
1120x615x9 1120x615x9
90/44.1x24.2 90/44.1x24.2
x39.0 x39.0
1852 - 001 - 25.11.2022