Beemoo ROTATE Bedienungsanleitung Seite 20

3c. To adjust the headrest (2) pull the lever (1) on the top. It should be set to the right position, this means that the
shoulder harness should come out approximately l cm above the child's shoulders.
3d. Tighten the harness by pulling the strap (6), it should fit the child snugly.
4a. Once the child is securely strapped in, you can tilt the seat by pressing the lever (7) to the required position.
Getting the child out ofthe seat
To get the child out of the seat, you should first place the seat in the loading position (2b).
3e. Loosen the harness straps by pressing the adjustment button.
3a. Then unfasten the buckle and get the child out.
Please make sure that the child gets out of the vehicle on the pavement side.
WARNING! The straps should never be twisted.
The harness buckle must be fastened correctly and the straps should fit the child snugly.
4. RECLINING INSTRUCTION
When use the seat in the rearward facing position, from 40-105 cm
4b. The seat should be fully reclined before rotate to rearward facing, only the position 3 is allowed.
When use the seat in the forward facing position, from 76-125 cm
4c. Once the child is securely strapped in, you can recline the seat by pressing the button (7) to the required position, all
the 3 positions are allowed.
19