Beemoo ROTATE Bedienungsanleitung Seite 17

Handwash in cold water
Do not bleach
s
Do not tuble dry
Dry flat in shade
s
• Dry the textile lining completely before using or storing it.
•
CAUTION! Never wash the straps and buckle; just wipe them with a damp cloth.
•
It is vital for the safety of your child that the harness buckle works correctly. Malfunctions of the harness buckle may be caused
by accumulations of food, dirt or foreign bodies.
•
Never lubricate or oil the harness buckle.
s
t
.
To install the Beemoo Rotate child restraint system follow the steps below:
.
1a. Unfold the leg(12)until it is in the verticalposition as shown.
1b. Move the button(11) to slide the ISOFIX (9) backwar ds unfolding the connector fully. Do this for both connectors.
1c. Guide the connectors towards the ISOFIX anchors in your vehicle until they lock together by clicking into place and
the indicator changes from red to green on both sides of the base.
1. INSTALLING THE CHILD SEAT
Do not iron
Do not dry clean
Do not spin-dry
16